– The PM130 PLUS is a compact, multi-function, three-phase AC powermeter specially designed to meet the requirements of users ranging from electrical panel builders to substation operators. The PM130 PLUS measurement inputs and power supply comply with Measuring Category III.
– The PM130 PLUS units include:
- A bright 3-row LED display enabling easy reading of local meters.
- A standard RS-485 communication port and a second optional RS-232/RS-422/RS-485, Ethernet, Profibus, Cellular or RF port (in certain regions only). These ports allow local and remote automatic meter readings and setup through the supplemental communication or user data acquisition software.
- Different communication options for remote communications with the meter. These options enable LAN and Internet communication with the unit.
- Selection of I/O cards ranging from 4DI/2DO, 4AO and up to 12DI/4RO with communication.
- All models are suitable for mounting on both 4-inch round and 92×92mm square cutouts.
The basic model which offers standard voltage, current, power and frequency measurements, and control capabilities.
Offers all the features of the basic model plus energy measurements and data logging. This version is available in certain regions only.
Offers all the features of the PM130E plus harmonic analysis capabilities.
Multifunctional 3-phase Power Meter
3 voltage inputs and 3 current transformer-isolated AC inputs for direct connection to power line or via potential and current transformers
True RMS, volts, amps, power, power factor, neutral current, voltage and current unbalance, frequency
Ampere/Volt demand meter
25/50/60/400 Hz measurement capabilities
Billing/TOU Energy Meter (PM130E & PM130EH)
Class 0.5S IEC 62053-22 four-quadrant active and reactive energy polyphase static meter
Three-phase total and per phase energy measurements; active, reactive and apparent energy counters
Time-of-Use, 4 totalization and tariff energy/demand registers x 8 tariffs, 4 seasons x 4 types of days, 8 tariff changes per day,
One–time easy programmable tariff calendar schedule
Automatic daily energy and maximum demand profile log for total and tariff registers
Harmonic Analyzer (PM130EH)
Voltage and current THD, current TDD and K-Factor, up to 40th order harmonic
Voltage and current harmonic spectrum and angles
Real-time Waveform Capture
Real-time “scope mode” waveform monitoring capability
Simultaneous 6-channel one-cycle waveform capture at a rate of 64 samples per cycle
Programmable Logical Controller
Embedded programmable controller
16 control setpoints; programmable thresholds and delays
Relay output control
1-cycle response time
Event and Data Recording (PM130E & PM130EH)
64kB (256kB on request) Non-volatile memory for long-term event and data recording
Event recorder for logging internal diagnostic events and setup changes
Two data recorders; programmable data logs on a periodic basis; automatic daily energy and maximum demand profile log
TOU+4DI module – four digital inputs with 1-ms scan time and battery backup for the real time clock; automatic recording of last five digital input change events with timestamps (see the PM130 PLUS Modbus Reference Guide)
4DIO – four digital inputs and two relay outputs with 1-cycle update time; unlatched, latched, pulse and KYZ operation; energy pulses, selection of solid state or electromechanical relays
12DIO – twelve digital inputs, 4 relay outputs and optional Ethernet or RS-485 communication port
4AO – four optically isolated analog outputs with an internal power supply; Selection of 0-20mA, 4-20mA, 0-1mA, and ±1mA output; 1-cycle update time.
Easy to read 3-row (2×4 characters + 1×5 characters) bright LED display, adjustable update time and brightness
Auto-scroll option with adjustable page exposition time; auto-return to a default page
LED bar graph showing percent load with respect to user-definable nominal load current
Internal clock with 20-second retention time
Optional battery backup (TOU+4DI module)
Standard 2-wire RS-485 communication port
Protocols: Modbus RTU, ASCII, DNP3.0; With Ethernet or GPRS module: Modbus/TCP, DNP3/TCP; Optional IEC 60870-5-101 and -104
ExpertPowerTM client for communicating with SATEC ExpertPowerTM Internet services (with Ethernet or GPRS modules)
TCP notification client for communicating with a remote Modbus/TCP server on events or periodically on a time basis (with the Ethernet or GPRS module)
Direct voltage measurement of up to 690v
Selection of current input connection:
5A – measurement of up to 10A using conventional 5A CTs
1A – measurement of up to 2A using conventional 1A CTs
RS5 – allowing connection remotely of 5A conventional CTs with split core remote sensors
HACS – selection of remote sensors up to 1200A with built in shorting circuit and class 0.5s system accuracy (meter plus CTs)
Pass through CT connection provides minimal burden
Auxiliary CT connection terminal for simple installation
Dual panel mounting – 92*92mm square or 4″ round cutout
Add on modular design to add second communication port, digital I/O or Analog output
Password security for protecting meter setups and accumulated data from unauthorized changes
Easy upgrading device firmware through a serial or Ethernet port.
PAS – Free meter configuration and data acquisition tool, including waveforms, phasors, harmonics and more
ExpertPowerTM – SATEC’s unique Energy Management Software (EMS), without client software installation
3rd Party Software – Fully open protocol for easy 3rd party software integration
Complies IEC62053-22, class 0.5S
Meets ANSI C12.20 –1998, class 10 0.5%
Comply with IEC 61000-6-2:
IEC 61000-4-2 level 3: Electrostatic Discharge
IEC 61000-4-3 level 3: Radiated Electromagnetic RF Fields
IEC 61000-4-4 level 3: Electric Fast Transient
IEC 61000-4-5 level 3: Surge
IEC 61000-4-6 level 3: Conducted Radio Frequency
IEC 61000-4-8: Power Frequency Magnetic Field
Meets ANSI/IEEE C37.90.1: Fast Transient SWC
Comply with IEC 61000-6-4: Radiated/Conducted class A
Comply with IEC CISPR 22: Radiated/Conducted class A
UL File no. E236895
Meets IEC 61010-1: 2006
AC and Impulse Insulation
Comply with IEC 62052-11: 2500 VAC during 1 minute
6KV/500Ω @ 1.2/50 μs impulse