The PM130 PLUS comprises of 3 types of models:

PM130P	The basic model which offers standard voltage, current, power and frequency measurements, and control capabilities.
PM130E	Offers all the features of the basic model plus energy measurements and data logging. This version is available in certain regions only.
PM130EH	Offers all the features of the PM130E plus harmonic analysis capabilities.

Multifunctional 3-phase Power Meter
 3 voltage inputs and 3 current transformer-isolated AC inputs for direct connection to power line or via potential and current transformers
 True RMS, volts, amps, power, power factor, neutral current, voltage and current unbalance, frequency
 Ampere/Volt demand meter
 25/50/60/400 Hz measurement capabilities
Billing/TOU Energy Meter (PM130E & PM130EH)
 Class 0.5S IEC 62053-22 four-quadrant active and reactive energy polyphase static meter
 Three-phase total and per phase energy measurements; active, reactive and apparent energy counters
 Time-of-Use, 4 totalization and tariff energy/demand registers x 8 tariffs, 4 seasons x 4 types of days, 8 tariff changes per day,
 One–time easy programmable tariff calendar schedule
 Automatic daily energy and maximum demand profile log for total and tariff registers
Harmonic Analyzer (PM130EH)
 Voltage and current THD, current TDD and K-Factor, up to 40th order harmonic
 Voltage and current harmonic spectrum and angles
Real-time Waveform Capture
 Real-time “scope mode” waveform monitoring capability
 Simultaneous 6-channel one-cycle waveform capture at a rate of 64 samples per cycle
Programmable Logical Controller
 Embedded programmable controller
 16 control setpoints; programmable thresholds and delays
 Relay output control
 1-cycle response time

Event and Data Recording (PM130E & PM130EH)

 64kB (256kB on request) Non-volatile memory for long-term event and data recording

 Event recorder for logging internal diagnostic events and setup changes

 Two data recorders; programmable data logs on a periodic basis; automatic daily energy and maximum demand profile log

I/O Options
 TOU+4DI module – four digital inputs with 1-ms scan time and battery backup for the real time clock; automatic recording of last five digital input change events with timestamps (see the PM130 PLUS Modbus Reference Guide)
 4DIO – four digital inputs and two relay outputs with 1-cycle update time; unlatched, latched, pulse and KYZ operation; energy pulses, selection of solid state or electromechanical relays
 12DIO – twelve digital inputs, 4 relay outputs and optional Ethernet or RS-485 communication port
 4AO – four optically isolated analog outputs with an internal power supply; Selection of 0-20mA, 4-20mA, 0-1mA, and ±1mA output; 1-cycle update time.

Display
 Easy to read 3-row (2×4 characters + 1×5 characters) bright LED display, adjustable update time and brightness
 Auto-scroll option with adjustable page exposition time; auto-return to a default page
 LED bar graph showing percent load with respect to user-definable nominal load current

Real-time Clock
 Internal clock with 20-second retention time
 Optional battery backup (TOU+4DI module)

Communications
 Standard 2-wire RS-485 communication port
 Optional
 Protocols: Modbus RTU, ASCII, DNP3.0; With Ethernet or GPRS module: Modbus/TCP, DNP3/TCP; Optional IEC 60870-5-101 and -104

 ExpertPowerTM client for communicating with SATEC ExpertPowerTM Internet services (with Ethernet or GPRS modules)
 TCP notification client for communicating with a remote Modbus/TCP server on events or periodically on a time basis (with the Ethernet or GPRS module)

Measurement
 Direct voltage measurement of up to 690v
 Selection of current input connection:
 5A – measurement of up to 10A using conventional 5A CTs
 1A – measurement of up to 2A using conventional 1A CTs
 RS5 – allowing connection remotely of 5A conventional CTs with split core remote sensors
 HACS – selection of remote sensors up to 1200A with built in shorting circuit and class 0.5s system accuracy (meter plus CTs)

Unique Design
 Pass through CT connection provides minimal burden
 Auxiliary CT connection terminal for simple installation
 Dual panel mounting – 92*92mm square or 4″ round cutout
 Add on modular design to add second communication port, digital I/O or Analog output

Meter Security
 Password security for protecting meter setups and accumulated data from unauthorized changes
Upgradeable Firmware
 Easy upgrading device firmware through a serial or Ethernet port.

Software Support
 PAS – Free meter configuration and data acquisition tool, including waveforms, phasors, harmonics and more
 ExpertPowerTM – SATEC’s unique Energy Management Software (EMS), without client software installation
 3rd Party Software – Fully open protocol for easy 3rd party software integration

Accuracy
 Complies IEC62053-22, class 0.5S
 Meets ANSI C12.20 –1998, class 10 0.5%
Electromagnetic Immunity
 Comply with IEC 61000-6-2:
 IEC 61000-4-2 level 3: Electrostatic Discharge
 IEC 61000-4-3 level 3: Radiated Electromagnetic RF Fields
 IEC 61000-4-4 level 3: Electric Fast Transient
 IEC 61000-4-5 level 3: Surge
 IEC 61000-4-6 level 3: Conducted Radio Frequency
 IEC 61000-4-8: Power Frequency Magnetic Field
 Meets ANSI/IEEE C37.90.1: Fast Transient SWC

Electromagnetic Emission
 Comply with IEC 61000-6-4: Radiated/Conducted class A
 Comply with IEC CISPR 22: Radiated/Conducted class A
Safety/Construction
 UL File no. E236895
 Meets IEC 61010-1: 2006
AC and Impulse Insulation
 Comply with IEC 62052-11: 2500 VAC during 1 minute
 6KV/500Ω @ 1.2/50 μs impulse